|Posted by Charles on April 6, 2013 at 9:05 PM|
Electric utility companies use a variety of locks to secure your meter. These locks prevent people from tampering with the electric meter, such as changing the meter's usage readout. No matter what type of locking system a utility company installs, most of the lock cylinders utilize what is commonly called a barrel lock.
Barrel locks use pins to turn the cylinder of the lock instead of a key. A barrel lock is also used on vending machines. The key is circular in design, with slots on the end. The key slides over the barrel cylinder of the lock and turns the pins. The lock disengages, and you can then open the electric meter.
The dust cap is a ball that rests on the end of the barrel lock. The device seals the barrel lock, preventing it from getting contaminated by water or other corrosive material. Once the circular pin key is inserted, it presses down on the dust cap, allowing the key to engage the pins of the lock cylinder.
The barrel lock has a beveled or sloped head around the cylinder. The head prevents the lock from being turned by pliers, vise-grip pliers or other grasping tools. The barrel head cannot be broken off.
Many of the electric-meter box locks are located at the bottom of the panel or under the meter. Some locks, such as the Sidewinder lock sold by McGard, has two barrel locks located on opposite corners of the meter panel. This type of lock slips onto the edges of the box and cover, securing the electric meter. The same key will open both locks.
The barrel locks used on electric meters are constructed so technicians can replace the parts, instead of replacing the entire locking system. You can replace the barrel, pins, casing or dust cap if any of these parts become damaged. Any one of the parts that gets replaced does not prevent the utility technician from using the same key to open the panel.
Few utility companies still use the crimp lock that attaches the electric meter. The crimp lock has a U-shaped pin that inserts into the panel button. A cap or cover slides over the U-shaped pin and is crimped into place with a crimping tool. Any time the meter requires maintenance or repair, the crimp lock is cut off by the technician and a new lock is installed. Each month a meter reader inspects the electric meter and records the readings. If the meter reader notices the crimp lock has been tampered with, he notifies the utility company. TO SEE HOW YOU CAN OPEN THE ELECTRIC METER PANEL Go to our website at www.barrellockmeterkey.com our you can call us at 951-545-8822.,
Utility Meter Lock Tool,
How to Hack Utility Meters,
Remove Electric Meter Locks,
Key for Electric Meter Lock,
Unlocking a Barrel Lock,
Pick Electric Meter Locks,
Gas Meter Lock Removal,
How to Open a Barrel Lock?
Electric Meter Tampering with a Magnet,
Remove Natural Gas Meter Lock,
Meter Lock Picking,
Utility Meter Lock Key,
Electric Meter Barrel Lock Key,
Electrical Box Lock Key,
AEP OHIO Barrel Lock Meter Key,
AEP OHIO METER KEY,
OHIO Meter Key,
Center Point Energy meter key,
ONCOR TEXAS METER KEY,
Edison Meter Key,Gas Meter Lock Removal, How to Break the Lock on Your Gas Meter?, Remove Natural Gas Meter Lock, How to Open a Gas Meter Lock? Lock, Remove, Utility Meter Locks, How to Unlock Gas Meter Lock? Remove Gas Company Lock, Picking a Barrel Lock, Unlocking a Barrel Lock, Need to Open Barrel Lock